Ender 3 Upgrades That Are Still Worth It: The Short List for Every Ender 3 Variant
Short answer The upgrades that turn an Ender 3, 3 Pro or 3 V2 into a reliable printer, in order: a textured…
Category: Parts & fit
Nozzles, build plates, hotends and extruders — with fitment tables that say “not verified” when we have not checked, because a wrong answer here costs you a hotend.
3D Printer Upgrades in the Right Order: What Actually Improves Prints on a Budget Machine
Short answer Upgrade in this order and stop when the prints are good enough: a filament dryer, a textured PEI plate, an…
Resin Printer Enclosure: Fumes, Temperature and Light, and What a Good One Fixes
Short answer An enclosure for a resin printer is mostly about air: it lets a vent fan pull the fumes to a…
Best Filament Dryer for a Bambu Lab Printer: Feeding the AMS From a Dryer, or Replacing It
Short answer The original Bambu AMS stores filament with desiccant but does not heat it, so PETG, TPU and nylon still need…
Bambu Lab H2D Build Plate: The Larger H2 Plate, and What Replacements Must Match
Short answer The H2D and H2S take a plate around 355 by 346 mm, larger than the 256 mm plate every earlier…
Bambu Lab P2S Upgrades: The New Hotend Family, Nozzle Sizes, and What Carries Over From the P1S
Short answer The P2S shares its hotend with the H2 series, not with the P1S, so any hotend you buy must be…
Bambu Lab A1 Upgrades Worth Buying: Hotends, Nozzle Sizes, and What to Leave Alone
Short answer The A1 needs very little. The upgrades that earn their place are spare quick-swap hotends in other nozzle sizes, 0.2…
Bambu Lab A1 Mini Build Plate: The 184 mm Size, and Which Replacement Plates Fit
Short answer The A1 mini uses its own plate size, about 184 by 184 mm with the Bambu front tabs and rear…
Bambu Lab P1P Enclosure: Bambu’s Kit vs Printed Panels vs a Tent, and What Each Gets You
Short answer The P1P is a P1S without the walls, and three routes give it walls back: Bambu’s official P1P enclosure kit,…
Bambu Lab P1S Build Plate: 256 mm Options, and Which Surface for PLA, PETG and ABS
Short answer The P1S uses the 256 by 256 mm Bambu plate, the same one as the P1P, X1 Carbon, A1 and…