Prusa Core One Build Plate: The 254 by 241 mm Sheet, and Which Replacements Fit
Short answer The Prusa Core One takes a steel sheet about 254 by 241 mm, the same size and locating pins as…
Category: Parts & fit
Nozzles, build plates, hotends and extruders — with fitment tables that say “not verified” when we have not checked, because a wrong answer here costs you a hotend.
Creality K1 and K1C Build Plate: The 235 mm Plate They Share, and Which Replacements Fit
Short answer The Creality K1 and K1C use the same plate: 235 by 235 mm spring steel with a textured PEI coating,…
Creality K1 Max Build Plate: The Larger Plate, and What a Replacement Must Match
Short answer The K1 Max takes its own plate, sized for the 300 by 300 mm bed and larger than the 235…
Sovol SV08 Upgrades: The Micro Swiss FlowTech Hotend, an Enclosure, and What the Voron-Style Frame Already Gives You
Short answer The SV08 is a large open CoreXY running Klipper, so it has the frame and firmware of a much pricier…
Creality K1, K1C and K1 Max Upgrades: The Hotend Kit, Silicone Sock, and What Not to Touch
Short answer On a K1, K1C or K1 Max the upgrade that pays is the hotend: Creality’s current kit fits all four…
Qidi Plus 4 Upgrades: Bimetal Quick-Swap Nozzles, Spare Hotend, and What the Plus 4 Already Has
Short answer The Qidi Plus 4 arrives with a heated chamber and a hotend rated far above most printers, so the useful…
Flashforge Adventurer 5M Build Plate: Official Textured and Smooth PEI Options, and What Fits the 5M, 5M Pro and AD5X
Short answer The Adventurer 5M, 5M Pro and AD5X share the same plate, and Flashforge sells it in a textured PEI and…
Elegoo Neptune 4 Max Upgrades: Hotend Kits, a Dryer, and Taming a 420 mm Bed-Slinger
Short answer On a Neptune 4 Max the upgrades that matter are a spare hotend kit, which it shares with the Neptune…
Creality K2 Plus Build Plate: Frosted PEI, the 350 mm Size, and Which Replacements Fit
Short answer The K2 Plus uses a large plate sized for its 350 by 350 mm bed, and Creality ships it with…
Anycubic Kobra S1 Build Plate: The 264 by 276 mm Sheet, and Which Replacements Fit
Short answer The Kobra S1 takes a plate about 264 by 276 mm, sized for its 250 by 250 mm bed, and…