Hatchbox PLA: The Reference Budget Spool, and What Its Reputation Rests On
Short answer Hatchbox PLA is the spool a lot of slicer profiles were tuned on: consistent ±0.03 mm diameter, colours that match…
Category: Filament
Print and bed temperatures, drying times, enclosure requirements, and how to choose between PLA, PETG, ABS, ASA and the filled variants.
eSUN PLA+ (PLA PRO): What the Plus Buys You, and How It Differs From Plain PLA
Short answer eSUN PLA+ is plain PLA with impact modifiers: a part in PLA+ survives a drop that would shatter the same…
ABS 3D Printer Filament: Still Worth Printing, and What It Needs to Succeed
Short answer Print ABS when you need acetone smoothing or vapour welding, or a specific ABS-matched colour; otherwise ASA does everything ABS…
ABS-Like Resin: What Makes It Tough, and When Standard Resin Is Not Enough
Short answer Buy an ABS-like resin the first time a standard-resin print breaks in your hands. It is formulated to bend a…
Creality TPU: Which Printers Can Actually Feed It, and the Settings That Work
Short answer Creality TPU is a Shore 95A flexible filament, the easiest grade to print. It feeds well on Creality’s direct-drive printers,…
Water Washable Resin: The Convenience, the Catch, and How to Dispose of the Water
Short answer Water-washable resin lets you rinse prints under the tap instead of in isopropyl alcohol, which is the whole appeal. The…
Best Filament for the Bambu Lab A1 and A1 Mini: What the Open Frame and the AMS Lite Change
Short answer On an A1 or A1 mini print PLA, PETG and TPU 95A; skip ABS, ASA and nylon, because the frame…
Best Filament for Lithophanes: White PLA, and Why the Spool Matters More Than Usual
Short answer Print lithophanes in a plain white PLA with tight diameter tolerance; the image is made of thickness variations, so any…
Best Filament for Cosplay: PLA for Armour, PETG for Props That Get Dropped, TPU for Anything Worn
Short answer Print armour plates and helmets in PLA or PLA+: it is light, cheap in bulk, holds detail, and sands and…
Creality PETG and Hyper PETG: Which Line for Which Printer, and How to Print It Clean
Short answer Creality’s standard PETG is a mid-range spool for bed-slingers at 230 to 245 °C; Hyper PETG is a low-viscosity blend…