Flashforge 3D Printers: Adventurer 5M, 5M Pro, AD5X and the Rest
LayerWalker is a participant in the Amazon Services LLC Associates Program. We may earn a commission when you buy through links on our site, at no extra cost to you.
Flashforge’s current consumer range is the Adventurer 5M family: the open 5M, the enclosed and filtered 5M Pro, and the four-colour AD5X, all 220 mm CoreXY. The Adventurer 3 and 4, Creator Pro and Finder are legacy. The Creator 5 Pro is a four-toolhead machine aimed at workshops. Buy the 5M for value, the 5M Pro for fumes and ABS, the AD5X for multi-colour.
Where to buy
The lineup
| Model | Build volume | Frame | Nozzle | Multi-colour | Status |
|---|---|---|---|---|---|
| Adventurer 5M | 220 × 220 × 220 mm | CoreXY, open | 280 °C | No | Current |
| Adventurer 5M Pro | 220 × 220 × 220 mm | CoreXY, enclosed, HEPA | 280 °C | No | Current |
| AD5X | 220 × 220 × 220 mm | CoreXY, open | See listing | Yes, 4 spools | Current |
| Creator 5 Pro | See listing | Enclosed, 4 toolheads | High-temperature | Yes, toolchanger | Current, workshop |
| Adventurer 4 | 220 × 200 × 250 mm | Enclosed cantilever | 265 °C | No | Legacy |
| Adventurer 3 | 150 × 150 × 150 mm | Enclosed cantilever | 240 °C | No | Legacy |
| Creator Pro / Pro 2 | 227 × 148 × 150 mm | Enclosed, dual extruder | 240 °C | Dual nozzle | Legacy |
| Finder | 140 × 140 × 140 mm | Open cantilever | 240 °C | No | Legacy |
Which one
- Best value CoreXY: Adventurer 5M. See the 5M page.
- Shared room, ABS, fumes: 5M Pro. See the 5M Pro page.
- Multi-colour: AD5X. See Flashforge multi-colour.
- Two materials with no purge, in a workshop: Creator 5 Pro toolchanger.
What the family is not
A high-temperature engineering platform. The 5M family stops at 280 °C and has no heated chamber, so nylon and PC belong on a Qidi Q-series or Bambu H2S. The legacy Adventurer 3 and 4 still work but are slow Marlin-era machines; buying one new makes little sense next to a 5M.
The units in the box
The listings are the Adventurer 5M, the 5M Pro and the AD5X.
FAQ
Do Adventurer 3 nozzles fit the 5M? No; different hotend families.
Is Flash Print required? No; Orca Flashforge and OrcaSlicer profiles exist.
LayerWalker
Print defect diagnosis, calibration procedures and parts that actually fit. Corrections welcome through the contact page.
